Your cart is empty

eZrun 18A-SL ESC + 18T 5200KV Brushless Motor + Program Card(A2)

$47.93
Add to Cart:



The Combo includes the following items:
  • 1 X eZRun-18A-SL brushless ESC
  • 1 X 18T (2030 sized) 1/18 scale sensorless brushless motor
  • 1 X Program card for car ESC

eZRun-18A Brushless ESC for 1/18 Car (Version 2.0)

Specification:
  • Output: Continuous current 18A, burst current 50A.
  • Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
  • BEC Output: 6V/1A.
  • Resistance: 0.01 Ohm.
  • Motor Supported: Sensorless Brushless Motor
  • Suitable Brushless Motor:
    • With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥12T, Off-Road≥18T;
    • With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥18T, Off-Road≥24T;
  • Suitable Car: 1/18 on-road or off-road cars / trucks for normal race or sportful race.
  • Size: 31.5mm(L) * 24mm(W) * 15mm(H).
  • Weight: 19g(Without wires)
Features :
  • Compatible with all sonsorless brushless motor.
  • Use top quality electronic components to enhance the current endurance ability of the ESC.
  • Excellent start-up, acceleration and linearity features.
  • With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
  • With 4 steps of maximum reverse force adjustment.
  • Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
  • With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
  • Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
  • With 8 steps of timing adjustment to get the best compatibility with various of motors.
  • Easily program with only one button and compatible with pocket-sized program card.
  • The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).

EZRUN Series Brushless motors for 1/18 Car (2030 sized)

Features:
  • Top quality materials:
    • Aluminium shell (case)
    • High quality magnets
    • Copper wires of high temperature endurance
    • Good quality bearings
  • Dustproof design.
  • Big output power.
Specification :
ModelKVDiameter(mm)Length(mm) (Without Shaft)Shaft(mm)Shaft Length(mm)Weight(g)
18T/SL-2030520020.030210 

LED Program Card For Brushless ESC

This program card is used to set the programmable parameters of brushless ESC, it has a friendly user interface to set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.

Product Number: LED_PC2. This is available for XERUN and EZRUN series (Version 2.0 ) car ESC;

Specification :
  • Size: 88mm (L) * 58mm (W) * 14mm (H)
  • Weight: 40g.
  • Input Voltage: 4.8-6V (If the ESC hasn't a built-in BEC, you must use an additional battery pack to supply the program card)
The programmable items of LED_PC2 (Available for XERUN and EZRUN series car ESC of Version2):
  1. Running Mode
  2. Drag Brake Force
  3. Low Voltage Cut-Off Threshold
  4. Start Mode
  5. Maximum Brake Force
  6. Maximum Reverse Force
  7. Initial Brake Force
  8. Throttle Neutral Range
  9. Timing
  10. Over-Heat Protection
  11. Motor Rotation
  12. Lipo Cells

(Note: The item 11 and 12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)


  • 499 Units in Stock


eStart Your Web Store with Zen Cart(tm)